|
|
Axis Duplex Pumping & Heating Unit combined with Heater and thermometer
control is called Pumping & Heating Unit.
Duplex Pumping & Heating Unit is essential,
where the LDO, FO , Heavy Oils are used for
combustion. Generally the burners are
designed for heat release. But the heat
release depends on the fuel flow to the
burner . In other words, Pumping & Heating
units are to meet the demands of the burner
& combustion chamber .
Pumping units are used in the applications
where light fuels like, kerosene, HSD, Diesel
are used . Pumping Units, Pumping & Heating
Units are designed in many models to cater
the needs of Industry . |
| SPU Simplex Pumping Unit |
Used in the batch type, less flow rate requirements. |
| DPU Duplex Pumping Unit |
Used in continuous running furnaces, and large flow of fuel requirements. Size: ½”, ¾” , 1 ” |
| SPH Simplex Pumping & Heating Unit |
Used in batch type furnaces, heavy oil applications, where the
viscosity of the fuel will be reduced to burnable conditions, and
less flow rate requirement. |
| DPDH Duplex Pumping & Duplex Heating Unit |
Used in continuous running applications where the viscosity of
the fuel will be reduced to burnable conditions, and less flow
rate requirement. Consists two sets of pumps with motor, two
sets of vertical oil preheater , duplex inlet & outlet oil filters,
common ringmain arrangements for keeping one set will be
stand by . This system ensures the breakdown free unit.
Size: ½”, ¾” , 1 ”
Heater Capacity : 3kw – 120 kw. |
| TPU Transferring Pumping Unit |
This unit is generally used in the areas to unload the oil from tanker to main tank and main tank to service tank with flow meters for both light oil & heavy oil users. This pumping unit consists of pump with motor connected with dual inlet & outlet cock valves. Interchanging of the flow will be done by manual/ auto cock valves (ball valves). |
|
