A Journey of Thousand Miles Begins With Single Step

VSB Compressed Air Portable Oil Burner

VSB Compressed Air Portable Oil Burner
Principle

The

VSB compressed Air portable oil burner
operates on the principle of ventri suction. Compressed air at between 50 to 100 psi is used to create the suction for oil to flow into the burner from the portable tank and also to atomize the oil. No direct air pressure is applied to the oil in the tank, and therefore no initial or periodic pressure testing of the tank is required.

Components
The VS burner consist of:
  • Mobile 15 gallon oil tank burner lance
  • Detachable cast iron nozzle
  • Air and oil hoses
  • Pressure gauge
  • Air and oil control valves
  • Air and oil shutoff valves
Applications
The VS burner is a highly versatile portable Unit suitable for a large variety of heating operations. some of its many applications include:
  • Rapid and intense heating of MS parts to be bend straighten, expand or anneal components of railway wagons or boilers railway wagons or boilers
  • Lighting cupolas
  • Preheating large ladles
  • Skin drying of large moulds
  • General heating and repair work

Starting And Operation
Before starting up the burner, close the oil and air regulating valves And also the air shutoff valve near the pressure gauge. Prepare a lighting-up torch by winding oil-soaked cotton waste around a rod. Place the lighted torch near the mouth of the burner , and open the air shutoff valve first. Next gradually open the air control valve followed by the oil control valve till the oil ignities. By controlling the oil and air regulating valves the flame can be varied from a soft luminous low-temperature flame to one with a temperature as high as 1150oC suitable for rapid intense local heating. For intense heating ,the flame becomes highly powerful 5 to 10 minutes after ignition due to heating up of the nozzle. The flame can be easily adjusted for length and intensity to suit the work in hand.

TYPE OF OIL Light diesel oil or kerosene
OIL CONSUMPTION Min 9 tomax 27 lit/hr
OIL TANK CAPACITY : 15 gallons (67.5 liters)
AIR CONSUMPTION Approx 20 clm(0.5m³/minute)
AIR PRESSURE 50 TO 100 PSI (3.6 TO 7.2kg/cm2)
AIR AND OIL HOSE 12” (305mm) long each
BURNER LENGTH Approx 50”(1270mm)
MIN FLAME LENGTH 18” (457mm)
MAX FLAME LENGTH 48” TO 60” (1220 TO 1525mm)

Enquiry
Other Products
  • Fire All Gas Burner 1514
  • High Velocity Gas Burner 1435
  • Gas Burner 1562
  • HF Burner 001
  • Excess Air Light Oil Burner 2422
  • Fire All Heavy Oil Burner 2514
  • Furnace Oil Burner 2562
  • HF Burner 002
  • High Velocity Oil Burner 2435
  • Excess Air fuel/Gas Burner 3422
  • Fire All Dual Fuel Burner 3514
  • Dual Fuel High Velocity Burner 3435
  • Dual Fuel Burner 3562
  • HF Burner 003
NOTE : Dimensions shown are subject to change. please obtain certified prints from Axis Thermal Engineering Company. If space limitations or other considerations make exact dimension(s) critical.
WARNING: Situations dangerous to personnel and property can develop from incorrect operation of combustion equipment. Axis Thermal urges compliance with National Safety Standards and Insurance Underwriters recommendations, and care in operation.