Dual Fuel Burner - 3562
Enquiry
Series 3562 Dual-Fuel Burners are designed to give maintenance-free operation using heavy oil, light oil, or gas. There are no “Frills” on this burner – it has a heavy cast iron body of clean design that avoids clogging even when used on tough jobs such as forge furnaces fired with heavy oil.
Burner Capacity
The total air capacity of the burners is listed under list I for single blower supplying at 20”wg combustion air and 24”wg atomizing air for light oil operation and 34”wg combustion air and 38”wg atomizing air for heavy furnace oil operation. Use list II and III when selecting separate blowers for combustion and atomizing air.
Burner Operation
Oil with a viscosity of 70 to 90 seconds Redwood I and a pressure between 25 and 30 psi should be supplied to an Air/Oil ratio controller which will deliver oil to the burner at a pressure proportional to the main air pressure, thus maintaining the correct air/oil ratio at all firing rates.
Burner Construction
The heavy cast iron body can stand much abuse. All internal parts of the 3562 burner are machined. The smooth surfaces stay free of oil deposits and dirt, thus greatly minimizing the need for cleaning.
